GPUcluster
From APEWiki
Node type
Most nodes run CentOS 5.x, with openmpi-1.4.
On COS 5.x, to properly get a functional MPI environment, it is sufficient to create a file named ~/.mpi-selector with the content:
openmpi-1.4-gcc-x86_64
On COS 6.X, simply add the line below to your .bashrc:
module load openmpi-x86_64
Node list
Host name | MTHBRD | CPU | #cores | Freq | RAM | #GPU | GPU model | CUDA vers. | NVIDIA driver vers. | APEnet card | Op. Sys. | IPMI address | Quartus II versions installed: | BIOS Version | IB board | North Bridge Rev. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
agape0 | X8DTG-D | X5570 | 4 | 2.93 GHz | 24576 MB | 1 | M2070 | 4.2 | 319.21 | 3links | CentOS 5.8 | 10.0.0.200 | 11.0 (no SP), 11.1 (SP1), 12.0 (SP2), 12.1 (no SP) | 2.1a (28/10/2011) | YES | |
agape1 | X8DTG-D | X5570 | 4 | 2.93 GHz | 49152 MB | 1 | C1060 | 5.0 | 310.19 | CentOS 6.3 | 10.0.0.201 | 11.1 (SP2), 12.0 (SP2), 12.1 (no SP), 13.0 (SP1) | 2.1 (15/09/2011) | NO | ||
agape2 | X8DTG-D | X5650 | 6 | 2.67 GHz | 32768 MB | 1 | M2050 | 5.5 | 319.37 | 6links (nuova - 001) | CentOS 5.9 | 10.0.0.202 | 11.0 (no SP), 11.1 (SP1), 12.0 (no SP), 12.1 (no SP) | 2.1a (28/10/2011) | YES | C2 |
agape3 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 1 | M2050 | 4.2 | 304.60 | 6links (nuova - 00?) | CentOS 5.9 | 10.0.0.203 | 11.0 (no SP), 11.1 (SP2), 12.0 (no SP), 12.1 (no SP) | 2.0 (03/09/2010) | YES | |
agape4 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 1 | M2050 | 4.2 | 304.60 | 6links | CentOS 5.9 | 10.0.0.204 | 11.0 (no SP), 11.1 (SP2), 12.0 (SP2), 12.1 (no SP) | 2.0 (03/09/2010) | YES | |
agape5 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 2 | S2050 | 4.2 | 304.60 | 6links | CentOS 5.9 | 10.0.0.205 | 11.0 (no SP), 11.1 (SP2), 12.1 (no SP) | 2.0 (03/09/2010) | YES | |
agape6 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 2 | S2050 | 4.2 | 304.60 | 6links | CentOS 5.9 | 10.0.0.206 | 10.0 (SP1), 11.0 (no SP), 11.1 (no SP), 12.1 (no SP) | 2.0 (03/09/2010) | YES | |
agape7 | X8DTG-D | X5660 | 6 | 2.80 GHz | 10240 MB | 1 | M2070 | 4.2 | 304.60 | 6links | CentOS 5.9 | 10.0.0.207 | 11.0 (no SP), 11.1 (SP2), 12.1 (no SP) | 2.1a (28/10/2011) | YES | |
agape8 | X8DTG-D | X5660 | 6 | 2.80 GHz | 10240 MB | 1 | C1060 | 5.5RC | 319.21 | 3links | CentOS 6.4 | 10.0.0.208 | 11.1 (SP2), 12.0 (SP2), 12.1 (no SP), 12.1 (no SP) | 2.1a (28/10/2011) | YES | C2 |
apeiron1 | X8DAH+ | X5650 | 6 | 2.67 GHz | 24576 MB | 1 | C2050 | 4.2 | 304.60 | 6links (nuova - 002) | CentOS 5.9 | No IPMI | 11.0 (no SP), 11.1 (SP2), 12.1 (no SP) | 2.0 (01/06/2010) | NO | |
apeiron2 | X8DTG-QF | X5650 | 6 | 2.67 GHz | 20480 MB | 1 | C2050 | 4.2 | 304.60 | 6links | CentOS 5.9 | 10.0.0.199 | 11.0 (no SP), 12.1 (no SP) | 2.0c (30/12/2011) | NO |
Node topology (X+Y Torus)
|| || || || \/ \/ \/ \/ +----------+ +----------+ +----------+ +----------+ | agape2 | | agape3 | | agape4 | | agape5 | ==> | | <==> | | <==> | | <==> | | <== | 0 1 0 | | 1 1 0 | | 2 1 0 | | 3 1 0 | +----------+ +----------+ +----------+ +----------+ /\ /\ /\ /\ || || || || || || || || \/ \/ \/ \/ +----------+ +----------+ +----------+ +----------+ | apeiron1 | | apeiron2 | | agape6 | | agape7 | ==> | | <==> | | <==> | | <==> | | <== | 0 0 0 | | 1 0 0 | | 2 0 0 | | 3 0 0 | +----------+ +----------+ +----------+ +----------+ /\ /\ /\ /\ || || || ||