GPUcluster
From APEWiki
Node type
Most nodes run CentOS 5.x, with openmpi-1.4.
On COS 5.x, to properly get a functional MPI environment, it is sufficient to create a file named ~/.mpi-selector with the content:
openmpi-1.4-gcc-x86_64
On COS 6.X, simply add the line below to your .bashrc:
module load openmpi-x86_64
Node list
| Host name | Motherboard | Processor | #cores | Freq | RAM | #GPU | GPU model | CUDA vers. | NVIDIA driver vers. | APEnet card | Operating System | IPMI address |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| agape0 | X8DTG-D | X5570 | 4 | 2.93 GHz | 24576 MB | 0 | 4.1 | 285.05.33 | Centos 5.8 | 10.0.0.200 | ||
| agape1 | X8DTG-D | X5570 | 4 | 2.93 GHz | 49152 MB | 1 | M2070 | 5.0RC | 304.33 | Centos 6.3 | 10.0.0.201 | |
| agape2 | X8DTG-D | X5650 | 6 | 2.67 GHz | 32768 MB | 1 | M2050 | 4.1 | 285.05.33 | 3links | Centos 5.8 | 10.0.0.202 |
| agape3 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 1 | M2050 | 4.1 | 285.05.33 | Centos 5.8 | 10.0.0.203 | |
| agape4 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 1 | M2050 | 4.2 | 295.41 | Centos 5.8 | 10.0.0.204 | |
| agape5 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 2 | S2050 | 4.1 | 285.05.33 | 3links | Centos 5.8 | 10.0.0.205 |
| agape6 | X8DTG-D | E5620 | 4 | 2.40 GHz | 12280 MB | 2 | S2050 | 4.1 | 285.05.33 | 3links | Centos 5.8 | 10.0.0.206 |
| agape7 | X8DTG-D | X5660 | 6 | 2.80 GHz | 10240 MB | 1 | S2070 | 4.1 | 285.05.33 | 6links | Centos 5.8 | 10.0.0.207 |
| agape8 | X8DTG-D | X5660 | 6 | 2.80 GHz | 10240 MB | 1 | C1060 | 5.0RC | 304.33 | 6links (nuova - 00?) | Fedora 17 | 10.0.0.208 |
| apeiron1 | X8DAH+ | X5650 | 6 | 2.67 GHz | 24576 MB | 1 | C2050 | 4.1 | 285.05.33 | 6links (nuova - 002) | Centos 5.8 | No IPMI |
| apeiron2 | X8DTG-QF | X5650 | 6 | 2.67 GHz | 20480 MB | 1 | C2050 | 4.1 | 285.05.33 | 6links | Centos 5.8 | 10.0.0.199 |
| 6links smontata (nuova - 001) |
